What should we pay attention to when using the loading and unloading device of the manipulator?

Domestic professional manipulator feeding and unloading device is a highly automated mechanical equipment, which can provide a great help for the production of enterprises. Therefore, in the process of use, not only to operate in accordance with the norms, but also to pay more attention to these details, to ensure that the performance of the machine tool feeding and unloading device is not affected.

1. Pay attention to checking electrical circuit system

Before starting the machine tool feeding and unloading device, we should pay attention to a comprehensive check to see whether there is water and oil in the electrical control box. If there is damp phenomenon in the electrical appliances, do not open the machine tool feeding and unloading device. In addition, we should often check whether the power supply voltage of the machine tool feeding and unloading device conforms to the operation of the equipment and whether the circuit is normal.

2. Attention should be paid to preventing dust and dirt from intruding into the interior

Usually, there will be oil mist, dust and even some metal debris or powder in the air of the machine shop. Once they fall on the circuit board or electronic device in the machine tool discharging device system, it is very easy to cause the decrease of insulation resistance between components, and even lead to the damage of components and circuit board in serious cases. Therefore, precautions must be taken to prevent these dust, oil and powder from entering the equipment.

3. Be careful not to overheat the device

If the temperature is too high, it will affect the performance of the feeding and unloading device of machine tool and cause failure. So when using the feeding and unloading device of machine tool, we should pay attention to checking whether the cooling fans can work properly, and cleaning the air duct filters every six months or every quarter, so as to avoid too much dust and clogging, and avoid the phenomenon of excessive temperature of the equipment.

The above points are some matters needing attention when using the feeding and unloading device of machine tools.